Learn More
There are many type of testing equipment developed for specific test requirement or tailor to the user need. To list a few below equipment.
UESHIMA
Lambourn Abrasion Tester is high correlation with the product results in evaluating the abrasion resistance of tires, belts, sole and other products. Used grindstone as the abrasion wheel to turn create abrasive to test piece on the circumference action. Special process is used for load on the test piece, dramatically higher accuracy and reproducibility of the test results compare others conventional Lambourn Abrasion Tester.
Application Standard : JIS K 6264 / ISO 23794
UESHIMA
The brittleness tester determines brittleness temperature and the 50% brittleness temperature of vulcanized rubber and plastics in a low-temperature environment. TM-2131 is the single type which comes with a set of sample holder, holding five samples, and TM2136 is the multiple type with four sets of sample holders with which four sets of five samples can be tested continuously just by turning a dial to change sample holders.
Application Standard : JIS K 6261 / JIS K 7216
UESHIMA
The Inside Drum Friction Tester evaluates the friction characteristics of test piece on a road surface formed inside a rotating drum. The test piece is made to contact the drum at a specified load and applied a slip ratio. The torque applied to the sample when a test is conducted under such conditions is used to measure the friction force. The drum surface can be used to simulate ice, wet or dry road surface conditions.
Test Speed: 0.1 to 40km/h (Test Piece)
Slip Ratio: 0 to ±100%
UESHIMA
AG-1110 Series Geer Aging Oven evaluates the heat resistance of rubber in aging and degradation. This product exposes samples to an atmosphere where new heated air is constantly supplied at a specified rate, thus performing accelerated degradation. The product comes in2 models: standard and large chamber types.
Applicable Standard: JIS K6257 / ISO188